dmesg - geforce gts 250
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 0902 03/01/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 1C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 7GB, range: 1GB, type UC
reg 1, base: 0GB, range: 8GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM covered: 6136M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 2GB, type WB
reg 4, base: 6GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbf77ffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
kernel direct mapping tables up to 0xbf77ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x1bfffffff]
[mem 0x100000000-0x1bfffffff] page 1G
kernel direct mapping tables up to 0x1bfffffff @ [mem 0xbf77f000-0xbf77ffff]
RAMDISK: [mem 0x344ec000-0x3626dfff]
ACPI: RSDP 00000000000fb940 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00044 (v01 030111 RSDT1120 20110301 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 030111 FACP1120 20110301 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0C469 (v01 A1682 A1682001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 030111 APIC1120 20110301 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 030111 OEMMCFG 20110301 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 030111 OEMB1120 20110301 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 030111 OEMHPET 20110301 MSFT 00000097)
ACPI: ASPT 00000000bf798420 00034 (v06 030111 PerfTune 20110301 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 030111 OEMOSFR 20110301 MSFT 00000097)
ACPI: SSDT 00000000bf79c0f0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
NODE_DATA [mem 0x1bfffb000-0x1bfffffff]
[ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x1bfffffff]
On node 0 totalpages: 1570575
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 767970 pages, LIFO batch:31
Normal zone: 12288 pages used for memmap
Normal zone: 774144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
PM: Registered nosave memory: 00000000bf798000 - 00000000bf7da000
PM: Registered nosave memory: 00000000bf7da000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s85056 r8192 d21440 u131072
pcpu-alloc: s85056 r8192 d21440 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1546027
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6070112k/7340032k available (7006k kernel code, 1057732k absent, 212188k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
NR_IRQS:16640 nr_irqs:1216 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3474.634 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6949.26 BogoMIPS (lpj=13898536)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26689 entries in 105 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU X 990 @ 3.47GHz (fam: 06, model: 2c, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
Brought up 12 CPUs
smpboot: Total of 12 processors activated (83391.21 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf798460 03C90 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 03C90 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf7dff000-0xf7dff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7df8000-0xf7dfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf7dfe000-0xf7dfe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007]
pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03]
pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887]
pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f]
pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7dfd000-0xf7dfd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1000-0x101f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007]
pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03]
pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887]
pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803]
pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f]
pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f]
pci 0000:01:00.0: [1b4b:91a3] type 00 class 0x01018f
pci 0000:01:00.0: reg 10: [io 0xbc00-0xbc07]
pci 0000:01:00.0: reg 14: [io 0xb880-0xb883]
pci 0000:01:00.0: reg 18: [io 0xb800-0xb807]
pci 0000:01:00.0: reg 1c: [io 0xb480-0xb483]
pci 0000:01:00.0: reg 20: [io 0xb400-0xb40f]
pci 0000:01:00.0: reg 24: [mem 0xf7eff800-0xf7efffff]
pci 0000:01:00.0: reg 30: [mem 0xf7ee0000-0xf7eeffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xf7ffe000-0xf7ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:03:00.0: [10de:0615] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:03:00.0: reg 30: [mem 0xfbce0000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
pci 0000:05:00.0: reg 10: [io 0xdc00-0xdc07]
pci 0000:05:00.0: reg 14: [io 0xd880-0xd883]
pci 0000:05:00.0: reg 18: [io 0xd800-0xd807]
pci 0000:05:00.0: reg 1c: [io 0xd480-0xd483]
pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f]
pci 0000:05:00.0: reg 24: [mem 0xfbdffc00-0xfbdffdff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
pci 0000:07:01.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:07:01.0: reg 14: [mem 0xfbeffc00-0xfbeffcff]
pci 0000:07:01.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:07:01.0: supports D1 D2
pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:02.0: reg 10: [mem 0xfbefe000-0xfbefe7ff]
pci 0000:07:02.0: reg 14: [io 0xec00-0xec7f]
pci 0000:07:02.0: supports D2
pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c71] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0600-0x0607] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS mismatch (256 != 64), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30216k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1369102389.872:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 11914
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7dff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7dfe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-05-21 02:13:10 UTC (1369102390)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=058f, idProduct=6362
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mass Storage Device
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 058F312D81B
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
usb 2-1: new high-speed USB device number 2 using ehci-pci
udevd[168]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:01:00.0: version 3.0
ahci 0000:01:00.0: irq 74 for MSI/MSI-X
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
tsc: Refined TSC clocksource calibration: 3474.547 MHz
Switching to clocksource tsc
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
ata5: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff900 irq 74
ata6: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff980 irq 74
ata7: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effa00 irq 74
ata8: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effa80 irq 74
ata9: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effb00 irq 74
ata10: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effb80 irq 74
ata11: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effc00 irq 74
ata12: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7effc80 irq 74
ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi13 : ahci
scsi14 : ahci
ata13: SATA max UDMA/133 abar m512@0xfbdffc00 port 0xfbdffd00 irq 16
ata14: SATA max UDMA/133 abar m512@0xfbdffc00 port 0xfbdffd80 irq 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:01.0 (unregistered net_device): not PCI Express
r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90000c78c00, f4:6d:04:14:2f:47, XID 18000000 IRQ 19
r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 2-1: New USB device found, idVendor=046d, idProduct=081b
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 2-1: SerialNumber: A5034720
ata6: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata12.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata11: SATA link down (SStatus 0 SControl 300)
ata12.00: configured for UDMA/66
ata5: SATA link down (SStatus 0 SControl 300)
scsi 12:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 12:0:0:0: Attached scsi generic sg2 type 3
usb 4-2: new full-speed USB device number 2 using uhci_hcd
firewire_core 0000:07:02.0: created device fw0: GUID 001fc600000f4247, S400
usb 4-2: New USB device found, idVendor=413c, idProduct=1002
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell USB Keyboard Hub
usb 4-2: Manufacturer: Dell
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 3 ports detected
usb 5-2: new low-speed USB device number 2 using uhci_hcd
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:1: Attached scsi generic sg4 type 0
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
usb 5-2: New USB device found, idVendor=045e, idProduct=00db
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
usb 5-2: Manufacturer: Microsoft
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1a.2-2/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1a.2-2/input1
usb 9-1: new full-speed USB device number 2 using xhci_hcd
usb 9-1: New USB device found, idVendor=056a, idProduct=00d4
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: CTL-460
usb 9-1: Manufacturer: Wacom Co.,Ltd.
usb 9-2: new low-speed USB device number 3 using xhci_hcd
usb 9-2: New USB device found, idVendor=045e, idProduct=0040
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae
usb 9-2: Manufacturer: Microsoft
usb 9-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-2.1: new full-speed USB device number 3 using uhci_hcd
usb 4-2.1: New USB device found, idVendor=413c, idProduct=2002
usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2.1: Product: Dell USB Keyboard Hub
usb 4-2.1: Manufacturer: Dell
usb 4-2.3: new low-speed USB device number 4 using uhci_hcd
usb 4-2.3: New USB device found, idVendor=1bcf, idProduct=0005
usb 4-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-2.3: Product: USB Optical Mouse
Adding 6280188k swap on /dev/sda5. Priority:-1 extents:1 across:6280188k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[714]: starting version 175
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
microcode: CPU0 sig=0x206c2, pf=0x2, revision=0x13
EDAC MC: Ver: 3.0.0
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c70
wmi: Mapper loaded
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ATK0110 ATK0110:00: Overriding interface detection
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1369102410.391:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1042 comm="apparmor_parser"
type=1400 audit(1369102410.391:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1043 comm="apparmor_parser"
type=1400 audit(1369102410.391:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1042 comm="apparmor_parser"
type=1400 audit(1369102410.391:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1043 comm="apparmor_parser"
type=1400 audit(1369102410.395:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1042 comm="apparmor_parser"
type=1400 audit(1369102410.395:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1043 comm="apparmor_parser"
input: Wacom Bamboo Pen Pen as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-1/9-1:1.0/input/input4
input: Wacom Bamboo Pen Finger as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-1/9-1:1.1/input/input5
usbcore: registered new interface driver wacom
microcode: CPU1 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU2 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU3 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU4 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU5 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU6 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU7 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU8 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU9 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU10 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU11 sig=0x206c2, pf=0x2, revision=0x13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb9/9-2/9-2:1.0/input/input6
hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:02:00.0-2/input0
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.0/input/input7
hid-generic 0003:413C:2002.0004: input,hidraw3: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1a.1-2.1/input0
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.1/input/input8
hid-generic 0003:413C:2002.0005: input,hidraw4: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1a.1-2.1/input1
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.3/4-2.3:1.0/input/input9
init: failsafe main process (1160) killed by TERM signal
hid-generic 0003:1BCF:0005.0006: input,hidraw5: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2.3/input0
init: avahi-cups-reload main process (1255) terminated with status 1
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: irq 75 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
ppdev: user-space parallel port driver
type=1400 audit(1369102410.775:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1283 comm="apparmor_parser"
type=1400 audit(1369102410.775:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1283 comm="apparmor_parser"
type=1400 audit(1369102410.911:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1319 comm="apparmor_parser"
type=1400 audit(1369102410.911:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1319 comm="apparmor_parser"
2:3:1: cannot set freq 16000 to ep 0x86
uvcvideo: Found UVC 1.00 device (046d:081b)
usbcore: registered new interface driver snd-usb-audio
input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
vboxdrv: Found 12 processor cores.
vboxdrv: fAsync=0 offMin=0x23a offMax=0x3334c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
nvidia: module license 'NVIDIA' taints kernel.
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
r8169 0000:07:01.0 eth0: link down
r8169 0000:07:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (1763) terminated with status 1
r8169 0000:07:01.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: kdm main process (1788) killed by TERM signal